1 / 4
Yeti Rambler Kids Cup Veer Cruiser Wagon Tray Adaptor — zdjęcie 1
1 / 4

Yeti Rambler Kids Cup Veer Cruiser Wagon Tray Adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adaptor to allow the use of Yeti Rambler Jr. in the Veer Cruiser wagon kids tray.

Ocena
5 / 5
Polubienia
15
Pobrania
87
Wydruki
1
Wyświetlenia
1078
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Yeti Rambler Jr. to Veer Cruiser Tray Adaptor

I created this little adaptor so that a yeti rambler jr could be used in the goveer kids tray that latches onto the wagon. This does not exclude it from being used for other size cups. See “sizing”. 

https://www.yeti.ca/drinkware/bottles/kids-bottle-355ml.html

https://goveer.com/en-ca/pages/cruiser

Sizing

See attached pictures. The bottom of the adaptor is 70mm, gradually increasing in diameter via a loft. The max width acceptable for the cup would be 77.5mm as that is the inner diameter of the top portion of the adaptor.

Cut the top of the model off in your slicer and print a test fit!

Supports

I did not use any and due to the nature of the design it is not necessary.

Printed

I printed on a Mk3s+ with PrusaSlicer using black PLA.

Tagi