Oculus Rift CV1 ( Original ) Golf club Controller Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Golf club attachment for Rift CV1 Controller ( original ones ) for games like Walk-about Golf
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently got a cheap Oculus rift CV1 headset and controller bundle for my PC, and started playing Walk-about Minigolf. Great game but i wanted some more immersion
As far as i could find there are no golf club attachments for the original Oculus and ONLY for the Rift S / Quest ETC. i modelled this from scratch using a dimensional accurate controller model i found online .
uses M3 hardware to secure it together
i cut off the handle of an old putter , make sure the shaft is close to 12MM where you plan on attaching it. you can use the printed part as a guide to drill the hole that secures the printed part to the shaft ( make sure to do this or it will go flying!! )
i used some 1/16" Closed cell Neoprene foam to secure the controller ( on the inside contoured part of the attachment )
any questions, feel free to ask. one of my more involved projects and i am very proud of it, learned a ton along the way . all done with Fusion 360 .
* DISCLAMER *
i am NOT responsible for you YEETING your controller into something breakable, this is designed for use as a PUTTER only . please make sure the controller is secure before swinging the damn thing around ( if you have to )