Industrial cutting shears belt holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I always put holes in my pockets from carrying my loading dock shears everywhere at work. This was a rugged solution.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I used to work on a loading dock where we had to use metal or plastic seals on tractor trailer doors to show that they had not been opened between stops. I had to carry heavy duty shears to cut them when we received a trailer with one on it. They were heavy and always putting holes in my pockets. I designed this over a few months and a few iterations to get the best holder I could. This has a tight belt clip, wall reinforcement, and a knob on the inside to clip them in so they don't fall out of you bend over.
I would suggest printing at 100% infill but you may find you can get away with less depending on your rugged you need it.
The last picture are the shears this was designed for but you should be able to modify for your needs.