Too Many Bones: Baddie Chip Dividers for Undertow, Unbreakable, and Splice and Dice

These are divider tokens to separate the new categories of Baddie chips (Break, Krelln, Mech) found in the expansions Undertow and Unbreakable for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each chip has the Baddie Type icon and point count on the front. The edges of the 1-pt dividers have one notch, the edges of the 3-pt dividers have three notches, the edges of the 5-pt dividers have five notches, and the 20-pt dividers have no notches.

Baddie chip dividers for the base game are found at:

https://www.printables.com/model/430080-too-many-bones-baddie-chip-dividers

Edit: Added 1-, 5-, and 20-pt dividers for Dual Baddies, like those found in Splice and Dice.  These divider chips come in two types: flat face and split-level face.  For those of you who do filament swaps, the split-level face lets you put a two-color front on the divider.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 5

Rafts:

No

Supports: 

No

Resolution:

0.4 mm Nozzle; 0.1 mm Layer Height

Infill: 

20%

Filament: eSun; Ender; Prusament; FormFutura PLA Black; White; Royal Blue; Iron Grey

Notes:

Filament swaps were done to highlight the text.

How I Designed This ===================

The Baddie chip dividers were designed in Fusion 360. The Baddie Type icon images were copied from the downloadable Tyrant Creation Sheet. The images were converted to black and white in Gimp and slightly edited, and then converted to .SVG files using Inkscape. The .SVG files were uploaded into Fusion 360 for extrusion onto the Baddie chip dividers. The resulting .STL files were exported through MeshMixer.

Category: Games