IKEA Grundtal improved hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved hooks for IKEA Grundtal
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 518
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these simple hooks for the IKEA Grundtal since I don't like the fact the original steel ones move that much and thus, since I mainly used silicone utensils, they tend to come off the bar.
This design is snap-fit, but be careful to install the hooks since if not done properly they can snap. Once on the bar, they stand still in place.
I recommend to print them with 4 walls (that is basically 100% infill) and a 0.2mm layer height. I printed them in PLA, if you'll print with PETG please leave a feedback, I'm curious on how they'll behave, especially during the installation!