TTGO Lora32 T3 Slimline Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 1433
- Wydruki
- 13
- Wyświetlenia
- 4447
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TTGO Lora32 T3 Slimline Case
This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1.
I have both running on the home IOT.
I've included a picture of the boards I have as there are a confusing amount of different boards offered on the market.
This case also suits the boards with and without header pins fitted.
Screwless design that clips together firmly.
A spudger maybe required to get it apart.
All printed in PLA with no supports required.
I've included STEP files as well as STL to make it easier to modify if required.
Hope this helps someone.