Small Picture Frame with hinged rear stay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Picture Frame with print in place hinged rear stay
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small Picture Frame with hinged rear stay
Visible picture area 73mm W x 95mm H (2.88" x 3.73")
Rear stay hinge leg is print in place (hinge will work after printing) then stuck on to back plate.
I used Bostik which makes a strong bond to the PLA
The two small flat tabs to hold the back in are fixed with two tiny screws.
They rotate to allow the back of the frame to be removed.
For the front glass I used 1.5mm clear plastic sheet available from the big online retail store beginning with "A"
All printed in wood effect PLA, no supports required.
I've included Step files as well as STL to make any alterations easier.
If you require a different size the model will scale up or down in CAD or your slicer.
Hope this helps someone.