16th Century Mughal Jali Pierced Screen Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beautiful accent lighting piece with multiple colour settings based on a 16th Century Mughal jali geometric pattern.
- Ocena
- 0 / 5
- Polubienia
- 107
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
I was inspired by a 16th century Mughal jali (pierced window screen) on display at the New York Metropolitan Museum of Art. Thus, I replicated the 2 different Islamic Geometric Patterns into something easier to print and light up with a single WS2812B RGB LED.
Please note that the first 2 layers of each of the 5 “jali”s as well as the “base shell” were printed in white PLA to help better bounce light around the interior of the pierced chamber. As well, I used superglue to hold the chamber together
PRINT SETTINGS:
- PLA
- 0.2mm layer height
- 0.4mm nozzle diameter
- no supports required (already built into the “base shell” STL)
PARTS:
- 18650 cell
- TP4056 Lithium Battery Charger and Protection Module
- MT3608 Step-Up Adjustable DC-DC Switching Boost Converter
- 6x6 3.1mm-13mm SPST Mini Micro Momentary Tactile Push PCB Button Switch
- 7x7 6pin locking micro switch
- USB 3.1 Type C Connector 16 Pin Test PCB Board Adapter
- 8 pin DIP IC socket
- ATTINY85V 8 pin DIP IC
- 470Ω resistor
- WS2812B Strip LED, IP30, 60LED/m
- Perf Board
- Wire
- Four M3x6 pan head screws
CIRCUIT DIAGRAM:
