1 / 7
Bilge pump to 1/2 dripline NPT for DIY solar adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bilge pump to 1/2 dripline for DIY solar adapter (including NPT)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a DIY solar heater using ½" dripline and 12v pump but output was not strong enough so switched to 1300 Tsunami bilge pump. The 1 1/8th outlet on the pump is not very standard so created this to adapt/connect to my ½" dripline.
Added NPT adapter for common bilge pumps.