Workshop extractor 1 : 4 split
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Workshop extractor 26cm to 4x 10cm attachment.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This attachment reduces my workshop extraction from one 26cm hole to 4 x 10cm holes. It saved me from having to drill one large hole in the wall, instead I was able to frill 4 smaller holes in the roofing fascia and still move the same amount of air.
Its quite a niche problem but maybe someone else will find this useful.
The part is split up so that it fits on the build plate. I assembled with super glue and also put epoxy on the seams for strength. The assembly can be seen in the Plasticity file (in the Zip), it is also quite self evident if you look at the photos.
Parts A and B need supports, see photo.
I printed in draft mode PLA