Adderini Cocking Arm Lever - Reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
strain relief for the adderini cocking lever.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 488
- Wydruki
- 0
- Wyświetlenia
- 2512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
noticed that the cocking arm on the adderini gets a bit warped under strain... so I'm hoping this will help... time will tell.
Also I think it adds a little more comfort and color.
The screw holes line up nicely, just need a little longer screws…
other issue I had is it is a tight fit… which is nice… but hard to get on.
I ended up running it under the hot faucet for a couple mins then using a towel i was able to force it on :D
I printed in flat orientation, so the ribbed grip faces up.
used snug supports 30* overhang threshold
PLA - 20% cubic infill
3 perimeters
“ensure vertical shell thickness” off
Enjoy!