1 / 2
HueForge - My Hero Academia - Mirio & Eri Manga Panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Manga panel from MHA
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (47)Powiązane
Instructions for Bambu Studio and PrusaSlicer layer swaps.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm
This model was created with this manga panel image MIRIO.
I used Elegoo Black PLA, Hatchbox Silver PLA, Hatchbox Grey PLA, and Bambu White PLA.
Swap Instructions:
Set base/first color to BLACK
At layer #7 at 0.88mm, change to SILVER (or a Darker Grey)
At layer #14 at 1.72mm, change to GREY (Lighter Gray)
At layer #16 at 1.96mm, change to WHITE for the remainder of the print.