Anycubic Mega Zero electronics box extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to install BTT's stepper motor smoothers to my printer and found out that there is not enough space in the…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 946
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to install BTT's stepper motor smoothers to my printer and found out that there is not enough space in the box to fit them and securely fix. After some experiments I got idea to print the whole bottom part with holder for smoothers, but then better idea came: just rise the box so it can be mounted to upper hole/rails slot. This model is about that. Bottom part is used as-is, stock metal cover & fan.
To fix smoothers I used model https://www.thingiverse.com/thing:3351822
Print instructions
Category: 3D Printer Parts Summary
I wanted to install BTT's stepper motor smoothers to my printer and found out that there is not enough space in the box to fit them and securely fix. After some experiments I got idea to print the whole bottom part with holder for smoothers, but then better idea came: just rise the box so it can be mounted to upper hole/rails slot. This model is about that. Bottom part is used as-is, stock metal cover & fan.
To fix smoothers I used model https://www.thingiverse.com/thing:3351822
Print Settings
Printer:
Anycubic Mega Zero
Rafts:
No
</div>Supports:No
Resolution:
0.28
</div>Infill:20%
Filament: XVICO PLA Rainbow