1 / 2
Bike Trailer to Virtual Rear Seatpost Adapter — zdjęcie 1
1 / 2

Bike Trailer to Virtual Rear Seatpost Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I sometimes tow a kids trailer on my bike blocking my rear seatpost camera and light. This is a faux seat post for that!

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
181
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Converts a small horizontal bike trailer frame into a vertical post for attaching a rear camera or light behind the pannier. I have a Burley Encore X but I'm sure this could be adapted for other bike trailers.

You'll need M3x30mm screws and nuts x4

I used some silicone (or rubber would work) between the adapter and the trailer frame to allow for sufficient tightening and grip.

Print 2 of these, one mirrored (most slicers should have this functionality, I used Cura).

Supports are recommended for the very top of the arch

I've included my Blender file in case it helps in changing the size or position of the post hole

Tagi