Simpler BLTouch Mount for Anycubic Mega Zero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small remix of https://www.thingiverse.com/thing:4540528 I have fan duct mounted on lower bolt, so can't use that with…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 199
- Wydruki
- 2
- Wyświetlenia
- 2640
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Small remix of https://www.thingiverse.com/thing:4540528
I have fan duct mounted on lower bolt, so can't use that with that bltouch mount, so I cut it off.
Two bolts from X-endstop switch is enough to hold BLTouch securely.
Update:
I attached photo of my connection of BLTouch to the stock Mega Zero board.
Firmware: https://github.com/kad/Marlin/releases
anycubic_mega_zero_bl_a2-firmware.hex. - for wiring like mine, using EXT-A2. anycubic_mega_zero_bl_zmin-firmware.hex - using z-min stop connector. Flashing instructions on wiki: https://github.com/kad/Marlin/wiki
Print instructions
Category: 3D Printer Parts Summary
Small remix of https://www.thingiverse.com/thing:4540528
I have fan duct mounted on lower bolt, so can't use that with that bltouch mount, so I cut it off.
Two bolts from X-endstop switch is enough to hold BLTouch securely.
Update:
I attached photo of my connection of BLTouch to the stock Mega Zero board.
Firmware: https://github.com/kad/Marlin/releases
anycubic_mega_zero_bl_a2-firmware.hex. - for wiring like mine, using EXT-A2. anycubic_mega_zero_bl_zmin-firmware.hex - using z-min stop connector. Flashing instructions on wiki: https://github.com/kad/Marlin/wiki
Print Settings
Printer:
Anycubic Mega Zero
Rafts:
No
</div>Supports:Yes
Resolution:
0.2
</div>Infill:20%
Filament: Anycubic PLA Black