Rugged Box - Printable Pin Screw Replacements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pins for the Rugged Box by Whity and UNO Card Box by Markus_p to replace the need for screws
- Ocena
- 4,68 / 5
- Polubienia
- 231
- Pobrania
- 1912
- Wydruki
- 31
- Wyświetlenia
- 5172
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable pins replacing the screws allowing for a fully printable model without the need of fasteners. No modification of the box is required
There are 3 different pins that are slightly different. 2 of each need to be printed, and pressed into its corrosponding position.
Where the different pins are to be pressed is shown in the pictures
box_hinge_pin - main lid hinges at the back of the case
latch_hinge_pin - pins on the front of the lid which allow the latch to rotate
latch_clip_pin - pins on the front of the bottom piece where the latches clip to
I printed them standing up with a 0.16 layer height, using a brim and a slow print speed
To press them in I pushed them with my fingers as far as I could then used a flat peice of plastic to press them flush
-EDIT
Added a Pin Set which includes all pins required for a box with labels to help with confusion