1 / 6
Ridgid TS3650 10" Table Saw - Drive Belt Cover — zdjęcie 1
1 / 6

Ridgid TS3650 10" Table Saw - Drive Belt Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bought saw with only inside belt cover. Both covers are obsolete. This needs a large scale printer. 12"x12" (310x 310mm)

Ocena
0 / 5
Polubienia
5
Pobrania
42
Wydruki
0
Wyświetlenia
469
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a replacement part for number TH100067, table saw belt guard. This is an obsolete part, in itself and as a cover set. Instead of printing the swivel mounting tabs pins, I used two 5mm screws through threaded holes (no need to tap). Thickness is 2.5mm, same as original. Post printing: I sanded the catch and two small alignment tabs to smoothly close to prevent chance of braking. A little silicone or lithium grease wouldn't hurt. Not the neatest design but it works. 10 to 11 hour print time for me using a Sunlu S8 3D printer. Generic black PLA filament, 0.2 layer, walls 1.2, 40% infill, PEI build plate at 60C, Filament at 203C. Designed with Tinkercad.

Tagi