KONG Gasket Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gasket mount case design for KONG by Weteor
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a gasket mount case design for the KONG by Weteor. It fastens with M2 heatset inserts and M2 hex top screws. There are two lids I modeled for the full bottom row or to block the outer keys on the bottom row. The gaskets are 3mm neoprene foam cut to size.
The base was printed with bridging turned on and slowed way down on the first few layers. The lid was printed topside down on the print bed.
M2 Heatset Inserts: https://www.amazon.com/gp/product/B08ZJ6F39F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Neoprene Foam: https://www.amazon.com/Neoprene-Adhesive-Padding-Multi-Function-Soundproof/dp/B08RB2FWVR/?th=1
Switch Blockers: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs