MX Ergo 30-55° Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meticulously modeled stand for the Logitech MX Ergo trackball mouse.
- Ocena
- 5 / 5
- Polubienia
- 134
- Pobrania
- 1106
- Wydruki
- 18
- Wyświetlenia
- 6398
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Meticulously modeled 40° stand for the Logitech MX Ergo trackball mouse. Includes a slot for a trackball pusher tool (included) as well as a storage slot for the USB wireless receiver.
Uses (4) 9.5mm x 2.5mm and (8) 6mm x 3mm neodymium magnets for secure attachment to both the mouse as well as the metal base plate that comes with the mouse. Electrical tape can be added to the base to prevent it from slipping during use.
1/17/2023 update: uploaded v2 which has the following changes:
- Design file has been parametrized to allow for easy adjustment of various options such as tilt angle (30°, 35°, 40°, 45°, 50°, and 55°), passthrough hole, and top magnet size (6mm to match base magnets or 9.5mm for maximum holding strength).
- Removed trackball pusher as I found it to be rather useless.
- Tweaked slot design for USB dongle.
- Edge curvature is now G2 continuous instead of G1 for a smoother look.
Multiple STL options are now provided with options for angle, top magnet diameter, and passthrough hole. Recommended to print with supports on build plate due to USB dongle slot.