1 / 3
Bottle Holder for Sodapop Bottles Remix with plate — zdjęcie 1
1 / 3

Bottle Holder for Sodapop Bottles Remix with plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Bottle Holder for Sodapop Bottles from Sebi (https://www.printables.com/@Sebi)

Ocena
0 / 5
Polubienia
0
Pobrania
25
Wydruki
0
Wyświetlenia
127
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

I added a bottom plate because my sink has grooves and the feet were wobbly without a plate there.

Printed in PETG, works fine.

I think PLA should work too, but my dishwasher is directly under the sink so the sink plate heats up and I wanted to avoid warping/deforming.

 

Printed on Bambulab P1P with Material4Print PETG (gipsy/clear), no Supports needed.

Slicer added a brim, i think it should work without, didn't matter to me.

Filling 15 % Gyroid

Print time for a single one is somewhat over an hour.

Tagi