1 / 1
Simple earphone box - no other parts needed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just two pieces with a transition fit and two small notches for adequate holding force. No other parts required.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a new earphone container after the zipper on the original one broke - 3D printing to the rescue. The box is 80x50x70 (WxBxH) with 2mm thick walls. I recommend printing in PETG or something similarly tough, but PLA should work too. The box I use daily and which is shown in the pic was printed with a fillet on the edges instead of a chamfer as it is now, so the overhang should look much better.