Earphone Wrap for USB Type-C & 3.5mm plug Earphones OpenSCAD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You may want to adjust this in customer depending on the length of your cable.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 684
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
You may want to adjust this in customer depending on the length of your cable. To do so, go to the customizer interface and adjust the "h" variable. This adjust the height of the wrapper.
This is a design based from "iPhone 7 Earphone Wrap" by 80am33 https://www.thingiverse.com/thing:2161135
However it was redone to support a USB type-c plug instead. And also to be done in OpenSCAD to allow for easier modification by others in the future.
Plus you may want to reuse the usb type-c socket for other purpose.
If you need the socket by itself, you can check https://www.thingiverse.com/thing:3666075
2020-08-06: Added support for both trrs and type-c plug
Print instructions
Category: Music Summary
You may want to adjust this in customer depending on the length of your cable. To do so, go to the customizer interface and adjust the "h" variable. This adjust the height of the wrapper.
This is a design based from "iPhone 7 Earphone Wrap" by 80am33 https://www.thingiverse.com/thing:2161135
However it was redone to support a USB type-c plug instead. And also to be done in OpenSCAD to allow for easier modification by others in the future.
Plus you may want to reuse the usb type-c socket for other purpose.
If you need the socket by itself, you can check https://www.thingiverse.com/thing:3666075
2020-08-06: Added support for both trrs and type-c plug