1 / 7
Juh's Anet A8 lightweight and unobtrusive X-axis cable chain, remixed for plastic bearing blocks — zdjęcie 1
1 / 7

Juh's Anet A8 lightweight and unobtrusive X-axis cable chain, remixed for plastic bearing blocks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the two hot end carriage parts of Juh's AMAZING Anet A8 lightweight and unobtrusive X-axis cable…

Ocena
0 / 5
Polubienia
2
Pobrania
21
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the two hot end carriage parts of Juh's AMAZING Anet A8 lightweight and unobtrusive X-axis cable chain. https://www.thingiverse.com/thing:2785408

These remixed parts are for fitting Juh's model to Anet A8's that ship with plastic bearing blocks, rather than the original aluminium blocks.

You'll still need one of the "X-motor_mount" models from Juh's thing, https://www.thingiverse.com/thing:2785408/files

You'll also need to print 23 of the chain links designed by ModelStation. They're available here: https://cdn.thingiverse.com/assets/1c/7c/fd/70/7a/CableChainx4.stl

UPDATE 03192024:  I've added the 10 segment long link that I use in lieu of the first 10 links of the chain, that don't need to flex anyways.  The long link will reduce the number of individual links from 23 to 13.  That was, IMO, the most cumbersome part of installing this design.  I also added another version of the double wide fence that is NOT for the plastic bearing carriers, but for the original aluminum carriers that used to ship with the Anet A8.

UPDATE 03072021: I believe I may have installed the fence improperly, downstream instead of upstream, because as my chain links begin to wear in, I find they're binding and kinking a bit on the X axis return. I moved the fence upstream, and it eliminated the binding on return, but it seemed also to move binding to the right of the fence.

I extended the length of the fence and duplicated the attachment point so that it connects to the carriage both upstream and downstream for X travel. Kinking, both fore and aft is eliminated for me in this configuration.

If your printer operates smoothly with this model in its native configuration, don't change anything. If you find your links kinking, perhaps you could give the double wide fence a try.

Print Settings

Printer Brand:

Anet

Printer: 

A8

Rafts:

No

Supports: 

Yes

Resolution:

.2

Infill: 

100

Filament: Generic PLA White

 

 

 

Category: 3D Printer Accessories

Tagi