1 / 4
Whirlpool fridge door handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for door handle of my Whirlpool fridge.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Original door handle of my Whirlpool fridge (unfortunately, it's hard to figure out exact model) had broken in just a half of year of usage. So, after I've bought a 3D Printer, I had a dream to design and print a replacement. And here it is. :)
Source file of this model is awailable at OnShape and can be adapted to other fridges:
Printing tips:
- use PLA
- print vertically (as it's originally positioned)
- a lot of walls (I used 6), but I recommend to also leave a space for infill
- 100% infill
- brim is mandatory (at least 10 mm)
- if possible, try to put support only for the upper part of the handle and not in holes for screws (otherwise you'll have a hart time peeling it out)