Crossfire Rx support / holder for Armattan Rooster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for Crossfire rx that can be placed on the back of the armattan rooster frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was tired of seeing crossfire rx supports that require you to remove the small carbon square to be positioned between the two arms.
That small square is used to protect the screws and the arms themselves from possible crashes, preventing the bottom plate from being destroyed by an incorrect twisting of the screws.
Also with today's receivers being so small this isn't necessary at all. For this reason I created a crossfire insert that could be placed in the back Of the Armattan rooster.
It must be printed in TPU (0.1 or 0.2 max resolution) so that it fits perfectly into the side holes of the arms and put pressure on the rear standoffs.
Suitable for other RX. If you want I can modify the project for your personal RX.
Let me know if you like it and if you have any suggestions write in the comments! I will modify the project if needed.