1 / 2
125mm sandpaper modular rack — zdjęcie 1
1 / 2

125mm sandpaper modular rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular system for easy and accessible storage of sanding paper

Ocena
0 / 5
Polubienia
10
Pobrania
87
Wydruki
0
Wyświetlenia
624
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A modular system for easy and accessible storage of sanding paper

It comes as individual pockets that clip together so you can print as many as you want to fit your needs.

regular version can hold ~15 papers

Large will hold ~25

If you plan on printing a lot i would suggest the light version, it taks about 40% less material than the regular one

Assembly

Ideally you'd want to print a wall adapter and clip the individual pockets on it. the pockets are designed to be angled down and sit flush together

To clip the pockets together simply insert the round tabs on the front to the holes in the back and slide the front pocket down.

Printing

Wall hanger should be printed lying down with the tabs pointing upwards

pockets are best printed standing up, the model includes a little support that can be pulled off easily. a brim is recommended

Mine were printed with leftover pla/pla+/petg

Layer height can vary, i printed with 0.32 with no issues

 

Tagi