1 / 4
ST:TNG Pinball - Klingon Bird of Prey Mounting Stand — zdjęcie 1
1 / 4

ST:TNG Pinball - Klingon Bird of Prey Mounting Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a direct replacement for the metal wire that holds up the KBOP in the 1993 Williams "Star Trek: The Next…

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This is a direct replacement for the metal wire that holds up the KBOP in the 1993 Williams "Star Trek: The Next Generation" pinball game.

When printed in transparent or black, it is less noticeable and more attractive than the stock wire mount. Also, the top side of this mount has been tilted 15 degrees to give the KBOP more of a "swooping" look to its posture. Mount with original screws and zip tie the wire to the stand. You will need to trim off the flat pads; those were added to give the print a little extra adhesion to the heatbed to keep it from breaking loose mid-print.

Printed with PLA, this has enough rigidity to hold it up, but enough flex to give the KBOP some fun bounce as you play and nudge the cabinet.

Post-Printing

Trim off the tabs around the mounting loops. These are here only to give it more grip during printing since the stand has such a small footprint.

Category: Video Games

Tagi