1 / 1
Meanwell LRS-100 Power Supply Terminal Cover - Single Screw — zdjęcie 1

Meanwell LRS-100 Power Supply Terminal Cover - Single Screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a small cover designed to cover the terminals of the LRS-100 power supply.

Ocena
4,5 / 5
Polubienia
15
Pobrania
235
Wydruki
2
Wyświetlenia
1036
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a small cover designed to cover the terminals of the LRS-100 power supply to prevent contact with fingers and tools when in use. (Confirmed on an LRS-100-5, but likely works with others as well.) This has been remixed so that the left side (when looking at the power supply's terminals) is now a snap in and no longer requires a screw to be installed under the power supply, allowing for a flush mounting surface on the bottom. The right side will require an M3x6mm machine thread screw to secure properly.

Tagi