Ningning's Hyper Charger Bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front & rear bumpers to cover sharp edges, protect against scratches & helps cool better.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 433
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
These bumpers are designed to fit Hou Ningning's Hyper Charger (Model Huawei 4850N). The charger have some slightly sharp edges that can scratch your bag. The aluminum is also very prone to scratching. This bumper does 3 things:
1. Protect the charger against accidental drops & daily wear and tear.
2. Stops your charger from scratching stuff while inside your bag.
3. Better cooling, the bottom surface gets hot when charging, this raised the charger above the ground to cool by air.
Print settings:
Filament: 95A TPU (anything above 90A will work)
Nozzle size: 0.6 mm
Walls: 3 walls (1.8mm), can also do 1.6 mm with a 0.4/0.8mm nozzle.
Infill: 10-15%, Gyroid or Cubic.
Personal use only, not for selling.