Rain Collector Adaptor - 32mm Push-Fit Union Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptor connection for 32 mm push fit waste water piping, suits rain collector with M40 x 3 thread
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
* Adaptor model only, rain collector designs below
This part adapts rain water collector designs based on the Rain Collector by Patrick Harrer to use 32 mm push-fit fittings for rigid PVC piping.
It has a M40 x 3 threaded nut to connect to connect to push fit waste pipes found in the UK and Ireland, for example “FloPlast Push-Fit Bend Black 90° 32mm” from screwfix.
The design prints without support and screws directly onto the following rain water collectors:
- https://www.printables.com/model/450487-rain-collector
- https://www.printables.com/model/512598-rain-collector-65mm-square-downtube
I printed the parts in PLA+ as to test the material in exposure over the next year or two. It is probably recommend to use PETG, ABS or ASA if you have harsher weather than we get in Ireland!