Silhouette Cameo 2 Mat Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little guide for the mat for the Silhouette Cameo 2
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Silhouette Cameo 2 - Mat Guide
The Cameo 2 is an older machine but still widely used. I got one recently, and I was looking for a mat guide to help load the mat into the machine. The one I found didn't really fit at all in the hole, so this is my take on it.
The guide is meant to go into the same hole used to adjust the blade depth. It has a small hatch underneath to help popping it out.
It does fit snugly in the hole (same used to adjust the blade numbers).
I'm adding the model file too, if anyone has different tolerances in their machine and want to fix it slightly.
I used:
- 0.4 nozzle
- 0.2mm layer
- 50% infil
- 3 walls