3D Printed Guitar AMP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small guitar amp I took apart and replaced the case with 3D Printed parts.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 3002
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
This is a regular amp that I took apart and replaced with 3d printed part so it would match my Prusacaster.
The inserts are used in the top and bottom pieces, 4 holes each. 4 holes on the sides to hold the back on. 4 holes on sides of grill and 4 holes in speaker plate. I used M3 x 18mm screws to put everything together. 4 M3 nyloc nuts needed to hold speaker in place.
Link to Amazon AMP: https://amzn.to/3NtxVz2 (aff)
Link to heat inserts I use: https://amzn.to/3raMCzy (aff)
Link to screws: https://amzn.to/44i15rs (aff)
Link to Nyloc nuts: https://amzn.to/3r6incW (aff)