Xeltek Superpro 5000 6000 6100 6100N Hirose FX2 Socket Connector Cover.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover to protect the Hirose FX2 Connectors On the Xeltek Superpro Programmers when adapter is not in use.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover to protect the Hirose FX2 Connectors On the Xeltek Superpro Programmers when adapter is not in use.
Print in your choice of material, I found with PLA that a .2 layer height works the best for fitment.
Hope this helps solve dust in the connectors while not in use when stored without an adapter.
I have printed a few tested on a few programmers fit is good will vary from drop in to slight interference fit depending on alignment of your programmers connectors.
Thank You Visit https://www.stevenrhine.com
Xeltek User Group https://www.facebook.com/groups/xeltek
Fits: Xeltek Superpro 6100N, 6104, 6100, 6000, 6000E, 5000, 5000E
Xeltek 6100N Universal Programmer
https://www.xeltek.com/manual-programmers/universal-programmers/xeltekusauniversalicprogrammersuperpro6100/