Extended Nespresso Vertuo Pod Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extended version of @sdgsean's Nespresso Vertuo Capsule Pod Dispenser
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1956
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General
The goal here was to make it large enough that you can put the Nespresso Next machine on top of it. I was trying to solve two problems- To find a place to store my pods and something to lift the device so that I can insert my thermos underneath the machine and have it deliver the goods directly into my thermos.
Definitely take advantage of PrusaSlicer 2.6 Cut Tool. You'll pretty much need it unless you have a really large print bed. When you use cut, make sure to add Connectors to attach the pieces together. If you do the connector sizes just right and your tolerances well, you can technically get away with not needing any glue. (I still recommend glueing for stability).
These take quite some time to print so I recommend doing it with a large nozzle and large layers to speed up the time.