1 / 5
Staff of Homa Genshin Impact - Life-size — zdjęcie 1
1 / 5

Staff of Homa Genshin Impact - Life-size

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Staff of Homa set to life-size and cut into printable pieces. Needs to be glued together

Ocena
0 / 5
Polubienia
97
Pobrania
452
Wydruki
0
Wyświetlenia
4073
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

My daughter loves to play Hu Tao.  She already made the Staff of Homa in cardboard but I wanted to make one on the 3D printer.  I used a wooden broom stick as the actual staff.  All the rest is 3D printed.  This was my first usage of Prusaslicer 2.6 beta release.  I zoomed the model to life size and cut it up in pieces to fit the bed off the Kobra Neo printer.  I also used dowels to give the model extra strength.  Some of these needed some extra sanding to fit the model perfectly.  I did not made the 3D model of the staff

All credits to the designer who did a great job.  I just made it bigger and cut it up in pieces. I also included the extra hook that you can print for the bottom part.  You need to sand this down and glue it (you need to print it 2 times)

 

The files included are the 3FM files.  Reason is that when I exported the files one by one to STL files, some “cut” information and dowel holes got lost.
To print I only enabled one file at the time and then sliced that one model.

 

Remark: it is really big :-)

Tagi