1 / 1
Mountain bike silhouette 🚵‍♂️ ornament V1 – hardtail eMTB — zdjęcie 1

Mountain bike silhouette 🚵‍♂️ ornament V1 – hardtail eMTB

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,63 € – 3,22 € netto (bez VAT)

Dla pliku: emtb_silhouette_02mm_pla_mk3s_3h6m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,93 € netto (środek widełek).

Masa podana przez autora
33 g
Czas druku podany przez autora
3,1 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

What does a biker do when he misses his 🚲 in the winter? Prints themed home decorations.

Ocena
0 / 5
Polubienia
34
Pobrania
201
Wydruki
0
Wyświetlenia
1130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

What does a biker do when he misses his 🚲 in the winter? Prints themed home decorations. 😁❄️

Print one or two – maximum size what fits your 3D printer build plate. Use the bottom surface as the front side. Maintain min. 1 mm thickness – printed bike is then held against the wall without gluing. Move bikes around the house or apartment to new and new places. (At our home, it became a pleasant game and a daily surprise for others.)

PS: This silhouette is my favourite eMTB – CUBE Reaction Hybrid Pro 625 29" (2021).

Print instructions

Use some contrast colour. (Vertigo Grey by Fillamentum is a perfect choice.) Maintain min. 1 mm thickness.

Caution: Depending on the 3D printed size, details such as wheel strings, etc. may be lost. Use functions such as "Print thin walls" or "XY / Horizontal compensation" (approx. +0.1 to +0.2 mm). All details will then be one or two times the thickness of the nozzle diameter.

Tip: For Prusa i3 MK3s, 0.4mm nozzle and PLA, simply use the attached print file.

Tagi