1 / 4
NS 20 "KAMEEL" - directie/inspectiewagen - Spoor 1 (1:32) — zdjęcie 1
1 / 4

NS 20 "KAMEEL" - directie/inspectiewagen - Spoor 1 (1:32)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

NS 20 "KAMEEL" - directie/inspectiewagen - Spoor 1 (1:32)

Ocena
5 / 5
Polubienia
22
Pobrania
446
Wydruki
2
Wyświetlenia
2075
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my interpretation in Gauge 1 (1:32) of the inspection car build by Allan in Rotterdam for the “Nederlandse Spoorwegen” in 1954. 

https://nl.wikipedia.org/wiki/Kameel_(spoorwegmaterieel)

Due to the two domes on the roof, the nickname “Camel” was well deserved.

The inititial deployments were to transport the direction to inspections.

Later in her career she could be rented as a VIP-car. Unfortunately the blue livery was changed to the yellow/grey house style standard colours.

Since a complete restauration in 2019 this special wagon is still certified to operate on the Dutch railway network. It is preserved in the collection of “Het Nederlands Spoorwegmuseum”.  https://www.spoorwegmuseum.nl/…e/onze-treinen/de-kameel/

 

Parts needed:

Axles: 4 X Standard LGB wheel/axle-sets (3.0 mm metal rod, 30 mm wheels)

Bearings: 8 X MR63ZZ

Motors: 2 X Geared motor 16GA-050 or JGA20 (i.e. 12V/1400 rpm)

RC Receiver: Your personal preference

ESC: 6V ESC for brushed motors (AliExpres, eBay, BangGood, etc…..)

Power supply: I've used one 18650 cell, a charging/undervoltage PCB and a boost converter to achieve 6V DC.

Additional: LED's (red, white and red/white) for the interior and the front and rear signal lights. Sound module. Several standing and sitting 1:32 figures.

Screws: Several sizes, M2, M3 and M5

Paint

Plastic sheet for the windows.

 

 

06SEP2023: After printing my initial files I've observed and encountered several issues that required modifications. These corrected files, resulting in the model captured in the youtube video, are now uploaded.

Good luck printing the “KAMEEL”.