1 / 7
Snackbox Micro case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is made for Snackbox Micro. A leverless controller made by Junkfoodarcades.
To assemble it you need:
- 8 M3 heatset inserts that are not longer than 5mm in length
- 8 M3 screws
Changelog:
- 08.08.2023:
- Added a STL for the top 7 knubs
- 07.08.2023:
- Added a shadowline to the model
- Decreased the knub hole diameter
Update 30/04/2024:
Added a second case with a second thumb button that uses magnets for closure rather than heat inserts.
- You'll need to hand wire the extra button as the image shows.
- For assembly you'll need 16 6mm(diameter) x 3mm(thickness) magnets