Modular Organiser for Flyers

Give a flyer the second chance!
Unwanted flyer can be stored in this organiser to be reused later.
Advantage of this design is that it can be used for example under the kichen desk or in wardrobe.

Of course this print can be used in totally diferent way and i would be happy to see other solutions :-)

Print instructions

Design settings

For this project I used PrusaSlicer Modifiers which created pattern from photo. This pattern is actually a triangle infill with bottom and upper layers set to 0.

I've uploaded .3mf files where you can create your own design.
It is super easy :-)
In PrusaSlicer (Advanced and Expert mode) just set infill pattern and infill density to create a personalised design.
(note: Not every infill pattern is suitable for this organiser eg. concentric)

For more info learn from this video made by Jo Prusa.

Print settings

Material: PLA, PETG, etc
Layer height: 0.2
Supports: Yes (only for bottom and side panel)
Overall infill: 7%
Brim: not needeed

Printing Plan

For one section organiser you need to print:
2x Frames (Front Frame, Rear Frame),
1x Side Panel
1x Bottom Panel
2x Brace.

For two or more section you need just to multiply above mentioned parts by number of sections except frames files. You allways need Front and Rear. Two section organiser require - 1x Middle frame, three sections - 2x Middle frame etc.