1 / 7
Closed housing for the Vevor laser engraving machine control unit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Closed housing for the Vevor Laser Engraving Machine control unit
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a closed housing with button for the Vevor laser engraver control unit.
I myself have the L4040, but I think that the control unit is used on several models.
- Filament: PETG but all other filaments are okay too.
- Nozzle: 0.4
- Layer thickness: 0.2
- Filling: 15%
- Support: Only at the plug holes.