5015 fan mount for BIQU H2 on Sapphire Pro/Plus (SP-5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
improved geometry fan duct/mount for a 5015 blower to accompany an H2
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 829
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This fan duct is designed to print without supports as orientated in the .3mf.
This fan mount is intended to accompany the Biqu H2 bracket from here: https://www.printables.com/model/175642-twotrees-sapphire-plus-sp-5-v11-modular-biqu-h2-ex Using this fan mount and bracket combination does not require modification to the bed leadscrews as it maintains the position and z-height of the stock SP-5 hotend.
If also using a cable chain for the heatbed, this duct may collide with the cable chain while homing unless the cable chain does not extend above the plane of the heatbed