Sovol SV05 foot extenders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are 15mm tall foot extenders for the Sovol SV05, made for the purpose of elevating the frame.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These were made to elevate my Sovol SV05 to a height which will allow me to install a couple modifications I make to all my printers. Beneath the frame is where I like to install SD card reader extensions, a power switch, and a volt meter for monitoring PSU health.
These extenders are 19mm wide and 15mm tall. I suspect the Creality Ender 5 has the same rubber feet and these extenders should work equally as well on those machines.
The screws that attach the feet to the SV05 are M4x20mm. They'll have to be replaced with screws that are 35mm or longer. The screws I have handy are M4x40, and they work fine.