Willworx MTB Stand Replacement Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feets for a Willworx MTB Stand
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
After loosing one of the plastic feet of my Willworx MTB stand, i made my own and slapped together a set of replacement feet for it. If you print it at 100%, it will perfectly fit, BUT it won' sit snug on it and you would need to glue it somehow. But if you scale it down to 98% (overall) and use TPU, it will fit like a (pretty tight) glove.
It goes without saying, if you want to replace all 4 feet, you should most likely print 4 of these suckers.
Due to it more or less universal design, its perfectly usable as feet/protection for something else, just scale/mod it as needed.