Bambu Labs Removable Poop Bucket Right Side Reachable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thinner right-side reachable remix of the Removable Bambu Poop Bucket for those with space confinements. P1P, P1S, X1
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 704
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
***Arc Compatible***
This is a remix of the original Removable Poop Bucket for Bambu Lab printers. I have space restraints that make it much easier to reach the bucket from the right side. So this is a right side removable poop bucket.
I made the original thinner and added a handle as well as magnet holes to counteract the weight of the handle. The magnets intended to be used in the holes are 6x2mm round magnets. On the tray piece I sized the holes up since it prints vertically with supports for the holes. Because of this I recommend using glue to secure the magnets.
I intend to use this with the chute cover from user @thrutheframe 's design of this:
https://www.printables.com/model/244789-bambu-lab-magnetic-chute-cover-and-poop-management
Which should make sure no material ejects above the bucket,
I hope this helps for anyone struggling with the same issue. If anyone has any questions or suggestions for revisions please let me know in the comments section.