Hormann Remote Control Protective Sleeve/Cover Front Cap (HSE4BS, HSE2-868-BS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A front cap for Hormann Remote Control Protective Sleeve/Cover.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A front cap for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS).
To be used with Hormann HSE protective case by Jakub Kalfař.
I uploaded a STEP file so you can change the dimensions if your doesn't fit. It's important it fits snug in the cover.
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 3
Infill: 15%
Supports: yes, used standard on manual settings and painted only the bottom part with overhang angle 30° (or 60° depending where you measure it from → see the picture bellow and adjust the settings so it looks like this).
Other replacement parts
If you broke yours like I did, here is a list of replacement parts I found and made to repair mine.
- Hormann HSE4BS replacement cover with a hole by Hologos
- Hormann HSE4BS remote control buttons by Hologos
- Hormann Remote Control Protective Sleeve/Cover Loop (HSE4BS, HSE2-868-BS) by Hologos
- Hormann Remote Control Protective Sleeve/Cover Back Spacer (HSE4BS, HSE2-868-BS) by Hologos
- Hormann Remote Control Protective Sleeve/Cover Front Cap (HSE4BS, HSE2-868-BS) by Hologos
- Hormann HSE protective case by Jakub Kalfař