Elastic Shoelace Pull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use elastic shoelaces to workaround tying shoelaces. This can replace a broken shoelace pull or a ceiling fan pull.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I use elastic shoelaces to workaround tying shoelaces. The elastic shoelaces last a long time, but the end cord pull (especially the hinged clasp type) is easy to misplace or damage, so I've designed one that is easy to print. I’ve also used it as a pull for a ceiling fan string switch. This should work for many standard elastic shoelaces at its default size, but should be easy to scale up or down if needed. I print it using PLA with about 50% infill to give it strength and heft. Print it with the small end down, and use an outside brim, if needed.
Print Settings
Printer:
X1C
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Filament:
Any color
Notes:
Brim may be needed.
Category: Replacement Parts