1 / 5
Desktop Scotch Tape Dispenser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desktop tape dispenser for home or office use. Supports standard size Scotch tape rolls with a 1" core and 3/4" width.
- Ocena
- 4,8 / 5
- Polubienia
- 65
- Pobrania
- 317
- Wydruki
- 11
- Wyświetlenia
- 1451
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 11) (Komentarze: 17)Remiksy (0)Kolekcje (70)Powiązane
A stylish desktop tape dispenser for home or office use. This dispenser supports standard size Scotch tape roles with a core width of 1 inch (~26mm) and a tape width of 3/4 inch (~20 mm).
* Features a double sawtooth design that catches and cuts tape cleanly!
I printed with multiple filaments to create a rainbow spectrum to show off the ability to band colors due to the print orientation of the dispenser halves. Please be creative and share your results!
Notes:
- No supports required.
- All parts printed without using brims.
- Duplicate and mirror the dispenser half model to create each side.
- Easily assemble the two halves using four printed connectors.
- Drop in place the teeth.
- Insert the pin core and shaft through the center of the tape role and drop in place.
- No glue, screws, or additional parts required.
- I originally printed this model using Bambu PLA Matte filament which worked well. I later reprinted the teeth with a Bambu PLA Basic which resulted in them being a bit sharper and cutting the tape better.
- I printed all parts except the teeth with 15% infill at 0.16mm (Optimal in Bambu Studio slicer).
- The teeth I printed with 100% infill at 0.08mm (Extra Fine in Bambu Studio slicer).
- Shown as printed on a Bambu X1C.