Holder for solar copper bus bars (sammelschiene)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for bus bars made from copper roofing strips and M6 brass bolts and nuts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Useful for creating bus bars in your solar installation, it will allow you to create a single bus bar to make multiple low resistance connections.
This model is designed to accommodate a copper roofing strip like the ones pictured below. These strips are a standard size and cheap to buy from places like Amazon. It has two mounting holes either side and the copper bar fits in the middle. I drilled multiple holes in mine to accommodate M6 brass nuts and bolts.
I have also added the drill template to you can print on paper to drill your own holes. The FreeCAD file is attached to allow remixing.