1 / 5
Buggy Tire Glue Jig - Buggy Reifenklebemaschine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didnt found any Glue Jig for 1/8 Buggy Tires, so i designed one myself
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 2023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
Found only jigs for 1/10 tires so i designed a new one.
Printed it in ABS ( base and sideparts)
The Top Part takes lots of load so i printed it in PC-CF but every other mateial with 5-6 walls and high gyroid infill ( 40%) should work.
i glued a coin unter the high setting screw so the screw dont bury into the material