Non-Light base for Terminator Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because the glass is such a pain to source in the US I bought some from Amazon and made my own base that you can print…
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 3221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
Because the glass is such a pain to source in the US I bought some from Amazon and made my own base that you can print to fit. Note that the glass will always have different tolerances so I recommend printing just the top to test fit to the glass then print the full thing.
Depending on your glass you may need to increase the scale. I printed mine after printing the top at 101.5% via slic3r. Then I painted and stained with shoe polish. After that I took a bit of electrical tape around the top to make the glass 'seal' against the base properly.
Glass Link: https://www.amazon.com/gp/product/B007FXVOS2/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Happy Printing!